Michaël Groosman

+31 20 794 0643


Ketnapa Duangpoommet

+31 20 794 0643


Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 05  Components, modules, OEM equipment
  • 05.12  Tubings and tubing equipment
  • 05  Components, modules, OEM equipment
  • 05.13  Other components, modules, OEM equipment

Our products

Product category: Assembly

End-treatments, machining and assembly

Asahi Intecc offers in-house machining, welding, soldering and other end-treatments. (Sub-)assembly of Asahi components to other parts is also provided in-house, ensuring both time-saving with our high standards for quality.

More Less

Product category: Tubings and tubing equipment, Catheters, Assembly, Other components, modules, OEM equipment


With our continuous spooling process ensuring exceptional consistency with tighter tolerance, we can design, develop, and manufacture engineered shaft for a complex catheter. The shaft is designed to balance flexibility, torque response, kink resistance, and more, with our capability in a wide range of materials, including PTFE, Pebax®, PA12, stainless steel, etc.

More Less

Product category: Catheters, Other components, modules, OEM equipment

ACT ONE (Asahi Cable Tube)

A cable tubes possess a high maximum torque and high torque transmission compared to polymer braided tubes. Mechanical properties such as bending and axial stiffness, maximum torque can be adjusted by adjusting the amount of wires, while maintaining the same OD/ID. They also feature higher kink resistance and flexibility compared to hypo tubes.

ACT ONE cable tubes are applied to a wide variety of minimally invasive and interventional devices within Cardiology, Peripheral, Neurology, Oncology, Orthopedics and Endoscopy.

More Less

Product category: Catheters, Other components, modules, OEM equipment

Torque coil

A highly flexible coil consisting out of multiple layers with very fine wires. This makes the coil ideal for high speed rotation in very tortuous routings or anatomies. We offer in 2 Layer for one directional rotation and 3 Layer for both directions. Round and flat-wire type are available. Round is suitable for applications that require high speed rotation, while flat is suitable for elongation resistance and decreasing wall thickness.

More Less

Product category: Catheters, Tubings and tubing equipment, Other components, modules, OEM equipment

Torque hypotube

Asahi’s Hypotube incorporates two core technologies – wire drawing and torque transmission augmentation. It has  excellent torque characteristics, kink resistance and shape recovery characteristics. It well-suited for application such as endoscopic fine-needle aspiration (FNA), IVUS, FFR and iFR

More Less

Product category: Catheters, Other components, modules, OEM equipment


Wire rope Asahi Intecc makes full use of the proprietary wire processing technologies, such as ultra-thin wire drawing and die forming, to manufacture fine stainless-steel wires with diameters from 0.013mm to 0.50mm. They are ideal for applications that require high tensile strength, low axial elongation and high bending flexibility, such as angulation wires in flexible endoscopes and steerable catheters.

Torque rope  A regular wire ropes have reduced torque transmission. Our internal technologies make it possible to achieve close to 1:1 torque transmission in tortuous environments. Well-known applications are endoscopic clips, forceps, and other devices that require high flexibility with precise torque transmission.

Flexible Shaft (Drive cable) offers high torque force and excellent rotational performance during high-speed rotation, designed for transmitting power or rotary motion through obstructed or curved path, either between fixed shafts or shafts having relative movement.
It can solve problems of misalignment, absorb, and isolate vibration, and simplify power transmission designs and applications.

More Less

Product category: Catheters, Assembly, Tubings and tubing equipment, Other components, modules, OEM equipment

Coatings Technologies

Asahi Intecc offers extrusion, dip coat, and heat shrink solutions for customers developing delivery systems. Inner tubing may be attached by chemical etching, adhesive bonding on both ends, depending on the wall thickness, flexibility, and 1 to 1 torque requirements. Customers can now enjoy a more consolidated supply base with excellent in-house expertise in both metal and polymer solutions.

More Less

About us

Company portrait

Asahi Intecc Co., Ltd. is an ISO13485- and ISO9001-certified Japanese medical device manufacturer. We are specialized in custom-made flexible ultra-fine wire ropes and tubing with high torsional rigidity, such as the single layer ACT-ONE cable tube and the multi-layer Torque Coil. We also offer in-house coating and laser-weld or crimp assembly services to our micro rope and tube components.

Drawing from our vast experience in the medical device field (e.g. vascular, structural heart, endoscopic, minimally invasive and other devices), our in-house wiredrawing, wire-forming, coating, torque and assembly technologies provide a broad range of options for your device. Asahi Intecc’s four core technologies form the foundation of our original materials processing technologies.

Over more than a 40-year span, these technologies were developed by us while responding to the sophisticated requirements of our clients, leveraging them to create many custom high-performance medical components.

Company data

Sales volume > 500 Mio US $
Export content max. 75%
Number of employees > 5000
Foundation 1976
Occupational sector
  • Components, parts, modules, Original Equipment Manufacturers
  • Tubings and tubing equipment
  • Catheters